Home
Vantage
User Guide
Information about the main features of Vantage and the tasks that you can do from the user interface (UI).
Sensors
Sensors
The Sensors page lets you view all of the sensors that you have in your system.
Connect a sensor
Add a sensor
Before you can use a sensor in Vantage, you must add it.
Add an N2OS sensor
Before you can use an N2OS sensor in Vantage, you must add it.

Vantage
- Introduction
  An overview of Vantage.
- Administrator Guide
  Information about the Administration section of Vantage, and the tasks that you can do in this part of the software.
- User Guide
  Information about the main features of Vantage and the tasks that you can do from the user interface (UI).
  - Sensors
    - Sensors
      The Sensors page lets you view all of the sensors that you have in your system.
      - Details page
        The details page shows a set of fields which are applicable to the related type of sensor.
      - Summary drawer
        When you double-click a sensor in the table, the summary drawer shows. This lets you post a comment, or open the related details page.
      - Table interactions
      - Connect a sensor
        Identify and copy the sensor ID
        Before you can add a sensor to Vantage, you must first identify the sensor, and copy the ID for use in other the procedures that follow.
        Add a sensor
        Before you can use a sensor in Vantage, you must add it.
        Add an N2OS sensor
        Before you can use an N2OS sensor in Vantage, you must add it.
        Add an Arc sensor
        Before you can use an Arc sensor in Vantage, you must add it.
        Add a Guardian Air sensor
        Before you can use a Guardian Air sensor in Vantage, you must add it.
        Configure a sensor
        After you have added a sensor, you must configure it before you can complete the connection of the sensor.
        Configure an Arc sensor
        It is possible to configure an individual Arc sensor directly from the Sensors details page for the related sensor.
        Complete the connection of a sensor
        After you have configured a sensor, you must complete the connection of the sensor.
        Verify the connection of a sensor
        After you have completed the connection of a sensor, you must verify the connection of the sensor.
        Reset a sensor token
        If you lose a sensor's token, it is possible to reset it.
      - Troubleshooting
  - Alerts
  - Assets
  - Wireless
  - Queries
  - Vulnerabilities
  - Vantage IQ
  - Network
  - Graph
  - Process
  - Dashboards
  - Reports
  - Sites
  - Workbooks
  - Async operations
  - What's new
  - Administration
  - Profile settings
  - Organizations menu
- Print format documentation
  A list of all the print-format documentation that is available for Vantage.

Add an N2OS sensor

Before you can use an N2OS sensor in Vantage, you must add it.

Do the Add a sensor procedure and choose the N2OS option.

Paste the identifier (ID) that you previously retrieved into the Sensor ID field.

Note: Vantage does not support N2OS versions before 23.0.0.
Select Next.
Note: The sensor ID must be valid, and not be the same as one that was previously added in this Vantage console.

Vantage validates the ID.
Select the correct site:
- Select the correct site and network domain from the list.
- To create a new site, enter the correct city and country for the sensor. Select Continue.
The host ID and sync token that Vantage will use to synchronize with the sensor show.
Important: Do not lose the uniform resource locator (URL) or sync token. If you do, you will need to reset the token.
Copy the connection host URL and sync token, and paste them in a safe location.
Before you continue, you must configure the sensor.