Configure Stormshield SNS

Configure Guardian firewall integration with the Stormshield SNS firewall.

Before you begin

Make sure that you have administrator privileges.

Procedure

1. In the top navigation bar, select
   The administration page opens.
2. In the Settings section, select Firewall integration.
   The Firewall integration page opens.
3. In the top right section, select +
   A dialog shows.
4. From the Choose firewall dropdown, select Stormshield SNS.
   A dialog shows.
5. If it is not populated already, in the Host (CA-Emitted TLS Certificate) field, enter the host internet protocol (IP) address.
   
   
   
   
6. In the Authentication section, choose an option:
   • Credentials
   • Certificate
7. If you chose Credentials, continue from do step 7.a. If you chose Certificate, continue from step 8.
   1. In the User field, enter your user name.
   2. In the Password field, enter your password.
   3. Go to step 12.
8. If you chose Certificate, choose an option:
   • Import the certificate
   • Import the key
9. If you chose, Import the certificate, continue from step 10. If you chose Import the key, continue from step 11.
10. Import the certificate.
    1. Select Import the certificate.
       a dialog shows.
    2. Select the file and import it.
11. Import the key.
    1. Select Import the key.
    2. Select the file and import it.
12. Optional: If necessary, tune the integration's behavior in the Options section.
    1. If necessary, select Enable nodes blocking.
    2. If necessary, select Enable links blocking.
13. Select Save.

Results

The firewall integration has been configured.