Home
Arc
Learn how Arc provides endpoint security in high availability environments.
Arc Embedded
Arc Embedded TBD.
Preparation
Information on how to import Arc packages, and install a license.
Hardware setup
The recommended physical setup for the programmable logic controller (PLC).

Arc
Learn how Arc provides endpoint security in high availability environments.
- Arc
  Arc TBD.
- Arc Embedded
  Arc Embedded TBD.
  - Introduction
    An overview of Arc Embedded.
  - Requirements
    The machine and network requirements necessary to use Arc.
  - Preparation
    Information on how to import Arc packages, and install a license.
    - Arc licenses
      Before you can deploy and use Arc, you will need to buy a license. How Arc licenses are installed will depend on the existing installation that you have. Arc and Arc Embedded require separate licenses.
    - Install a license in Guardian or CMC
      Before you can use Arc you must install the applicable license.
    - Import Arc through the update service in Guardian or CMC
      Before you can deploy Arc, you must import it first. There a two methods you can use to do this, one method is through the Nozomi Networks Update Service. The alternative method is through a manual contents upload.
    - Import Arc through a manual contents upload in Guardian or CMC
      Before you can deploy Arc, you must import it first. There a two methods you can use to do this, one method is through a manual contents upload. The alternative method is through the Nozomi Networks Update Service.
    - Dependencies
      To enable all the functions of Arc, you need to have certain items installed on the host machine.
    - Local permissions
      It is important to understand the different local permissions that are necessary for the different operating systems.
    - Connectivity
      Arc connects to Guardian and Vantage through designated protocols and ports.
    - Hardware setup
      The recommended physical setup for the programmable logic controller (PLC).
  - Configuration
    Details on how to configure Arc.
  - Deployment
    Information on how to deploy Arc. This includes details for manual and automatic deployments, and deployment through a mobile device management (MDM) system.
  - Execution
    Information on the different modes that you can use with Arc.
- Print format documentation
  A list of all the print-format documentation that is available for Arc and Arc Embedded.

Hardware setup

The recommended physical setup for the programmable logic controller (PLC).

The RD55UP12-V module has two network interfaces. Arc uses one of these to connect to the upstream sensor. It is recommended to use the second network interface to monitor and have it connected to a switch SPAN port to get all the data from the central processing unit (CPU) module.

This setup works best in combination with Smart Polling enabled, leveraging the Mitsusbishi Electric MELSOFT strategy. The port used to connect to the upstream is also then used as a Smart Polling interface.