Home
Remote Collector
Installation Guide
Information and resources on how to install a Remote Collector, and the different options and settings available.
Virtual installation
Virtual installation
Before you install a virtual machine (VM), you should make sure that you are familiar with the minimum requirements, and the supported formats and software that you can use with the Nozomi Networks software products.

Remote Collector
- Introduction
  An overview of the Remote Collector.
- Installation Guide
  Information and resources on how to install a Remote Collector, and the different options and settings available.
  - Introduction
  - Physical installation
  - Virtual installation
    - Virtual installation
      Before you install a virtual machine (VM), you should make sure that you are familiar with the minimum requirements, and the supported formats and software that you can use with the Nozomi Networks software products.
    - Check the RAM of a virtual machine
      The amount of random-access memory (RAM) from the hypervisor might not correspond with the actual amount seen from within the virtual machine (VM). Therefore, it is important to confirm that your VM has sufficient RAM to support your configuration.
    - Install a virtual machine
      Do this procedure to install a virtual machine (VM).
    - Expand a disk on a virtual machine
      The monitoring scope of your sensor will dictate the size requirements of your virtual hard drive. Do this procedure to adjust the size of the virtual hard drive.
    - Add a secondary disk to a virtual machine
      If the main disk is not large enough when it is first imported, you can do this procedure to add a larger virtual data disk to the virtual machine (VM).
    - Add a monitoring interface to the virtual machine
      By default, the virtual machine (VM) has one management network interface and one monitoring interface. Depending on deployment needs, it might be useful to add more monitoring interfaces to the sensor.
  - Container installation
  - Basic configuration
  - Additional settings
  - Deployment
  - Compatibility Reference
  - Federal Information Processing Standards
- Troubleshooting
  Troubleshooting procedures to help you solve problems that might occur with the Remote Collector.
- Print format documentation
  A list of all the print-format documentation that is available for the Remote Collector.

Virtual installation

Before you install a virtual machine (VM), you should make sure that you are familiar with the minimum requirements, and the supported formats and software that you can use with the Nozomi Networks software products.

Virtual installations are best-suited for organizations that:

Need to separate the lifecycle of hardware from software
Are looking to centralize the management of their assets
Value the ability to easily scale their solutions

The Nozomi Networks solution is available in these formats:

When you deploy the virtual machine (VM), use a hypervisor that supports OVA or VHD file formats, such as:

VMware
HyperV
KVM
XEN

All components should be in good working condition. The overall hypervisor load must be under control, with no regular ballooning, so as to avoid unexpected behavior, such as dropped packets or overall poor system performance.