Home
Remote Collector
Learn how Remote Collectors let you deploy sensors in multiple isolated locations.
Installation Guide
Information and resources on how to install a Remote Collector, and the different options and settings available.
Federal Information Processing Standards
Disable FIPS mode
Do this procedure to disable Federal Information Processing Standards (FIPS) mode.

Remote Collector
Learn how Remote Collectors let you deploy sensors in multiple isolated locations.
- Introduction
  An overview of the Remote Collector.
- Installation Guide
  Information and resources on how to install a Remote Collector, and the different options and settings available.
  - Introduction
  - Physical installation
  - Virtual installation
  - Container installation
  - Basic configuration
  - Additional settings
  - Deployment
  - Compatibility Reference
  - Federal Information Processing Standards
    - Federal Information Processing Standards
      A description of the use of Federal Information Processing Standards in the Nozomi Networks software.
    - FIPS mode status
      When running in Federal Information Processing Standards (FIPS) mode, the sensor adds a FIPS indicator after the version string.
    - Enable FIPS mode
      It is important that you follow this procedure to make sure that you enable Federal Information Processing Standards (FIPS) mode correctly.
    - Disable FIPS mode
      Do this procedure to disable Federal Information Processing Standards (FIPS) mode.
- Troubleshooting
  Troubleshooting procedures to help you solve problems that might occur with the Remote Collector.
- Print format documentation
  A list of all the print-format documentation that is available for the Remote Collector.

Disable FIPS mode

Do this procedure to disable Federal Information Processing Standards (FIPS) mode.

About this task

When you switch to Federal Information Processing Standards (FIPS) mode, local user Web user interface (UI) passwords become invalid. You can use the n2os-passwd command to reset the passwords.

Procedure

Log into the console, either directly or through secure shell (SSH).
To go to privileged mode, enter this command:
```
enable-me
```
You can now perform system changes.
To disable FIPS mode, enter the command:
```
n2os-fips-disable
```
Reboot the system, or restart the container, to apply the changes.